Here we would like to introduce the correct using steps for corkscrew wine opener. The using steps are as follows:
The first step, using small serrated knife flat cut the plastic lid of wine firstly.
The second step, after cutting the plastic, with the spiral drill tilted into the center of the wood plug position! Don't be afraid to dip into a bar the knife will be crooked, and it will change as you rotate. It is not easy to break the cork from the center of the wood stopper. And it's easier when you pull up a wooden race.
Step three, rotate the auger into the cork! Note that if you make the last step beautifully, the wine knife will be very positive.
The fourth step, auger drill into the wood plug into a ring when the corkscrew opener with the first level of the bottle, a hand fixed the first stage, the other hand raised the Sea saber handle, using the principle of the lever pull out the cork.
The fifth step, with the first stage of wine opener sled cork, pay attention not to pull the cork off.
The sixth step, the first level to pry up the cork, with the second level continue to pry up the lower part.
Seventh step, completely open the cork, gently rotate it down。