1. First wipe the bottle clean, first with a knife along the rim of the bottle-shaped protruding parts, cut open the bottle cap plastic cap, pay attention to change hands, do not turn the bottle, if it is old wine, the bottom of the bottle there will be normal precipitation, Turn the bottle will make the precipitate drift. Take care when handling tin caps. It often leaves a sharp edge like a razor. Your hands are not touched by it, inconvenient.
2. Use a cloth or paper towel to wipe the bottle. If mold is found on the top of the cork, do not feel nervous. It is normal to have a mildew. It can not be said that the wine is broken. Wipe the bottleneck with a clean cloth. . For older bottles that are covered with lead, take extra care, as small quantities of exuded drinks react with lead to produce toxic lead salts.
3. Then insert the corkscrew screw tip into the center of the cork (if corkscrew, the corks are easily unplugged), then upright the auger and slowly turn it clockwise into the cork. Tip: Do not drill into the screw once, leaving a ring appropriate. Because I do not know the length of the cork, if the drill is drilled all at once, it will pass through the cork and sprinkle the cork into the wine.
4. The first articulation of the activities linked to the bottle, with his left hand firmly hold; then right hand lift the handle straight up.
Note: The left hand must be clenched, while the right hand is "lift" rather than push, otherwise it is easy to infer the cork. In addition, the mention will be more effort, because the force arm longer and more effort.
5. cork half out, then the second joint buckle bottle, repeat the previous action.
6 Feel the cork stopped when pulled out quickly, holding the cork by hand, gently shaking or turning, the gentleman to set aside the cork.